Maintaining the Chassis
Checking the Machine for
Loose Hardware
Service Interval:
Before each use or daily
1.
Prepare the machine for maintenance; refer to
Preparing the Machine (page 50)
.
2.
Visually inspect machine for damaged or worn
parts, and check for loose hardware.
Note:
Before operating the machine, replace
any damaged parts and tighten all loose
hardware.
Maintaining the Sprayer
System
Checking Sprayer System
Service Interval:
Every 50 hours
1.
Prepare the machine for maintenance; refer to
Preparing the Machine (page 50)
.
2.
Check all hoses, nozzles, and fittings for
damage and leaks.
Note:
Replace all damaged or leaking sprayer
components.
3.
Check the nozzle strainers and in-line strainers
for accumulation of dirt and chemical sludge.
Note:
Clean or replace strainers with an
accumulation of dirt and chemical sludge.
67
Summary of Contents for 34215
