Toro 31698, Operator'S Manual, Page: 16 / 100

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove the wing-deck-shipping straps
and braces.
Right deck cover 1
Left deck cover 1
2
V-belt 2
Lower the front-deck winglets.
3
No parts required
–
Check the tire and caster wheel
pressure.
4
No parts required
–
Level the front, center cutting unit.
5
No parts required
–
Level the winglet decks to the front,
center deck.
6
No parts required
–
Check the fluid levels.
7
No parts required
–
Grease the machine.
8
Production-year decal 1 Install the decal (CE machines only).
Media and Additional Parts
Description Qty. Use
Operator's Manual 1 Review it before operating the machine.
Engine owner's manual 1 Use it to reference engine information.
Declaration of conformity 1 For CE compliance
Ignition keys 2 Start the engine.
Note:
Determine the left and right sides of the
machine from the normal operating position.
1
Removing the
Wing-Deck-Shipping Straps
and Braces
No Parts Required
Procedure
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
16