Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Remove the side deck straps and brace
Deck cover R.H.
1
Deck cover L.H.
1
2
V-Belt
2
Lower the front deck winglets
3
No parts required
–
Level the front center deck
4
No parts required
–
Level winglet decks to front center deck
5
No parts required
–
Check the Tire Pressure
6
No parts required
–
Check Fluid Levels
7
No parts required
–
Grease the machine.
Media and Additional Parts
Description
Qty.
Use
Operator’s Manual
1
Engine Operator’s Manual
1
Operator Training Material
1
Provide the operator with information on the use and
maintenance of the machine
Parts Catalog
1
Ordering parts
Pre-delivery Inspection Sheet
1
Inspecting the product before delivering it to the owner.
CE Certificate
1
CE certification.
Production Year Decal
1
Used in conjunction with the CE kit
Note:
Determine the left and right sides of the machine
from the normal operating position.
Note:
Some parts may have already been installed at
the factory.
15
Summary of Contents for 31598
