Machine Specifications
Specifications Table
Description
4500-D
reference
4700-D
reference
Width of cut
280 cm (110 inches)
D
380 cm (150 inches)
F
Overall width
Cutting units down
286 cm (113 inches)
E
391 cm (154 inches)
G
Cutting units up
(transport)
224 cm (88 inches)
A
224 cm (88 inches)
A
Track width
Front
224 cm (88 inches)
B
224 cm (88 inches)
B
Rear
141 cm (56 inches)
M
141 cm (56 inches)
M
Height with ROPS
226 cm (88.8 inches)
C
226 cm (88.8 inches)
C
Overall length
Cutting units down
370 cm (146 inches)
H
370 cm (146 inches)
H
Cutting units up
(transport)
370 cm (146 inches)
L
370 cm (146 inches)
L
Ground clearance
15 cm (6 inches)
15 cm (6 inches)
Wheel base
171 cm (68 inches)
K
171 cm (68 inches)
K
Net weight
(with cutting units and no
fuel)
1937 kg (4,270 lb)
2277 kg (5,020 lb)
Note:
Specifications and design are subject to change without notice.
Cutting Unit Specifications
Specifications Table
Length
86.4 cm (34 inches)
Width
86.4 cm (34 inches)
24.4 cm (9.6 inches) to carrier mount
26.7 cm (10-1/2 inches) at 3/4-inch height of cut
Height
34.9 cm (13-3/4 inches) at 4-inch height of cut
Weight
88 kg (195 lb)
Attachments/Accessories
A selection of Toro approved attachments and accessories is available for use with the machine to enhance
and expand its capabilities. Contact your Authorized Service Dealer or Distributor or go to www.Toro.com for a
list of all approved attachments and accessories.
To best protect your investment and maintain optimal performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering
specification of our equipment. For peace of mind, insist on Toro genuine parts.
23
