g031617
Figure 56
1.
Oil cooler
3.
Radiator
2.
Access panel
Clean the radiator hourly if conditions are extremely
dusty and dirty; refer to
(page 48)
.
The cooling system is filled with a 50/50 solution
of water and permanent ethylene glycol anti-freeze.
Check the coolant level at the beginning of each day
before starting the engine.
The capacity of the cooling system is approximately
5.7 L (6 US qt).
CAUTION
If the engine has been running, the
pressurized, hot coolant can escape and
cause burns.
•
Do not open the radiator cap when the
engine is running.
•
Use a rag when opening the radiator cap,
and open the cap slowly to allow steam to
escape.
1.
Check the coolant level in the expansion tank
(
).
Note:
With a cold engine, the coolant level
should be approximately midway between the
marks on the side of the tank.
g031618
Figure 57
1.
Expansion tank
2.
If the coolant level is low, remove the
expansion-tank cap and replenish the system.
Note:
Do not overfill.
3.
Install the expansion-tank cap.
47