Toro 30839, Operator'S Manual, Page: 22 / 60

For Models 30807, 30839, and 30849 , move the
lever to the right or left to move the cutting units in
the same direction.
Note:
Do this only when the cutting units are raised or
if they are on the ground and the machine is moving.
Note:
The lever does not need to be held in the
forward position while you are lowering the cutting
units.
Engine-Coolant-Temperature-Warning
Light
The temperature-warning light glows if the engine
coolant temperature is too high. If the traction unit is
not stopped and the coolant temperature rises another
10°, the engine shuts off (
Figure 23 ).
Oil-Pressure-Warning Light
The oil-pressure warning light glows if the engine oil
pressure drops below a safe level (
Figure 23 ).
Alternator Light
The alternator light should be off when the engine is
running (
Figure 23 ).
Note:
If it is on, the charging system should be
checked and repaired as necessary.
Glow-Plug-Indicator Light
The glow-plug-indicator light glows when the glow
plugs are operating (
Figure 23 ).
Parking Brake
Whenever the engine is shut off, engage the parking
brake to prevent accidental movement of the machine.
To engage the parking brake, pull up on the lever
(
Figure 23 ).
Note:
The engine stops when you press the traction
pedal with the parking brake engaged.
Lift-Lever Lock
Move the lift-lever lock rearward to prevent the cutting
units from dropping (
Figure 23 ).
Fuel Gauge
The fuel gauge registers the amount of fuel in the tank
(
Figure 24 ).
g031598
Figure 24
1. Fuel gauge 2. Seat-adjustment lever
Seat-Adjustment Lever
Move the seat-adjustment lever on the side of the
seat outward, slide the seat to the desired position,
and release the lever to lock the seat into position
(
Figure 24 ).
22