Toro 30839, Operator'S Manual, Page: 15 / 60

3
Installing the CE Decals
Parts needed for this procedure:
1 Warning decal (104-5181)
1 Warning decal (99-3558)
3 Warning decal (107-1972)
Procedure
If this machine will be used for CE, affix the
CE-warning decals over the corresponding English
warning decals.
4
Installing the Hood Latch
CE Only
Parts needed for this procedure:
1 Lock bracket
2 Rivet
1 Washer
1 Screw (1/4 x 2 inches)
1 Locknut (1/4 inch)
Procedure
1. Unhook the hood latch from the hood-latch
bracket.
2. Remove the 2 rivets securing the hood-latch
bracket to the hood (
Figure 6 ).
g031570
Figure 6
1. Rivets 2. Hood-latch bracket
3. Remove the hood-latch bracket from the hood.
4. While aligning the mounting holes, position the
lock bracket and the hood-latch bracket onto the
hood (
Figure 7 ).
Note:
The lock bracket must be against the
hood.
Note:
Do not remove the bolt and nut from the
lock-bracket arm.
g012629
Figure 7
1. Lock bracket 2. Bolt and nut
5. Align the washers with the holes on the inside of
the hood.
6. Rivet the brackets and the washers to the hood
(
Figure 7 ).
7. Hook the latch onto the hood-latch bracket
(
Figure 8 ).
15