•
Do not remove or add attachments on a slope.
•
Do not park the machine on a hillside or slope.
Multi-Purpose Tool Safety
•
After striking a foreign object, shut off the engine,
remove the key, thoroughly inspect the attachment
for any damage, and repair the damage before
starting and operating the attachment.
•
Always lower the attachment each time you shut
off the machine or leave the operating position.
•
Do not allow anyone to stand on the attachment or
ride it in any way.
•
For wheeled machines:
– Use the counterweight on the traction unit
while using the boom jib and while pulling a
trailer using the hitch.
– Do not use the counterweight on the traction
unit while using the scarifier teeth.
Maintenance and Storage
Safety
•
Check fasteners at frequent intervals for proper
tightness to ensure that the equipment is in safe
operating condition.
•
Refer to the
Operator’s Manual
for important
details if you store the attachment for an extended
period of time
•
Maintain or replace safety and instruction labels,
as necessary.
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
decal99-9940
99-9940
1.
Tipping hazard—read the
Operator’s Manual
; the maximum
load is 103 kg (228 lb).
decal133-8061
133-8061
4
