g242654
Figure 20
1.
Tie-down loops
Unloading the Machine
1.
Lower the ramp (
2.
Unload the machine from the trailer with the
heavy end up the ramp, carrying loads low
(
).
•
If the machine has a
full
load-carrying
attachment (e.g., bucket or adjustable forks)
or a non-load-carrying attachment (e.g.,
stump grinder), back it down the ramp.
•
If the machine has an
empty
load-carrying
attachment or no attachment, drive it forward
down the ramp.
g204458
Figure 21
1.
Machine with full
attachment or
non-load-carrying
attachment—back the
machine down the ramp.
2.
Machine with empty or
no attachment—drive the
machine forward down the
ramp.
Lifting the Machine
You can lift the machine using the tie-down/lift loops
as lift points; refer to
.
20
