Operation
•
Never run an engine in an enclosed area.
•
Only operate in good light, keeping away from
holes and hidden hazards.
•
Be sure all drives are in neutral and parking
brake is engaged before starting engine.
•
Only start engine from the operator’s position.
•
Be sure of your footing while using pedestrian
controlled equipment, especially when backing
up.
•
Walk, don’t run.
•
Never operate on wet grass. Reduced footing
could cause slipping.
•
Slow down and use extra care on hillsides. Be
sure to travel in the recommended direction
on hillsides.
•
Use caution while operating near drop-offs.
•
Slow down and use caution when making turns
and when changing directions on slopes.
•
Never raise deck with the blades running.
•
Never operate with the discharge deflector
raised, removed or altered, unless using a grass
catcher.
•
Do not change the engine governor setting or
overspeed the engine.
•
Stop on level ground and shut off engine
before leaving the operator’s position for any
reason including emptying the catchers or
unclogging the chute.
•
Stop equipment and inspect blades after
striking objects or if an abnormal vibration
occurs. Make necessary repairs before
resuming operations.
•
Keep hands and feet away from the cutting
units.
•
Look behind and down before backing up to
be sure of a clear path.
•
Be aware of the mower discharge direction and
do not point it at anyone.
•
Do not operate the mower under the influence
of alcohol or drugs.
•
Use care when loading or unloading the
machine into a trailer or truck.
•
Use care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
Maintenance and Storage
•
Wait for all movement to stop before adjusting,
cleaning or repairing.
•
Clean grass and debris from cutting unit,
muffler, and engine to help prevent fires.
•
Clean up oil or fuel spillage.
•
Let engine cool before storing and do not store
near flame.
•
Do not store fuel near flames or drain indoors.
•
Never allow untrained personnel to service
machine.
•
Use care when checking blade.
•
Wrap the blade or wear gloves, and use caution
when servicing.
•
Only replace blade. Never straighten or weld
them.
•
Keep hands and feet away from moving parts.
•
If possible, do not make adjustments with the
engine running.
•
Keep all parts in good working condition and
all hardware tightened.
•
Replace all worn or damaged decals.
5
