Form No. 3439-319 Rev A
Bagger Enhancement Kit
ProLine Commercial Walk-Behind Mower with 36in Floating
Cutting Unit
Model No. 140-4321
Installation Instructions
Determine the left and right sides of the machine from the normal operating position.
Preparing the Machine
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Engage the parking brake.
4.
Shut off the engine and remove the key.
5.
For easier access, raise the front of the machine and support it using jackstands rated for your machine.
WARNING
Mechanical or hydraulic jacks may fail to support the machine and cause serious injury.
Use jack stands when supporting the machine.
Installing the Kit
Install the kit as shown in
g319532
Figure 1
1.
Nut (4)
3.
Right skirt bracket
5.
Left skirt bracket
2.
Skirt
4.
Bolt (4)
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3439-319* A
Summary of Contents for 140-4321
Page 2: ......
