Form No. 3436-885 Rev A
Jack Mount Kit
for Titan
®
Riding Mowers
Model No. 140-2067
Model No. 140-5124
Installation Instructions
Safety
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
decal127-6663
127-6663
1.
Warning—read the
Operator's Manual
.
2.
Crushing hazard—engage
the parking brake, shut off
the engine, and remove
the key; support the
machine using jackstands.
Installation
Determine the left and right sides of the machine from
the normal operating position.
1.
Park the machine on a level surface,
disengage the blade-control switch, move the
motion-control levers outward to the N
EUTRAL
position, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Secure the jack mount to the left front axle-tube
using 2 U-bolts and 4 flange nuts (
g202309
Figure 1
1.
U-bolt
3.
Jack mount
2.
Flange nut
4.
Left front axle-tube
4.
Torque the fasteners to 22.5 N∙m (200 in-lb).
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3436-885* A
