Toro 138-2995, Installation Instructions Manual, Page: 6 / 8

Routing the Air Conditioner Wire
and the Water Pump Wires
Machines with the Optional Cab Kit
1. Route the wire and bullet terminal labeled
A
/
C
CLUTCH
rearward along the right side of the
engine ( Figure 13 ).
g252841
g252842
Figure 13
1. Bullet terminal 3. Wire (
A
/
C CLUTCH
)
2. Cable tie
2. Secure the wire to the tube with a cable tie
(
Figure 13 ).
3. Route the wires with the 2-socket connector
labeled
WATER PUMP
across the front of the
engine and rearward ( Figure 14 ).
g252845
g252843
Figure 14
1. Back of the machine 2. Water pump wires (power
harness)
4. Route the wires with the 2-socket connector to
the washer-fluid tank (
Figure 15 ).
g252844
g252846
Figure 15
1. Back of the machine 3. Washer-fluid tank
2. 2-socket connector
(
WATER PUMP
)
4. Power harness
5. Secure the water pump wires of the power
harness to the hydraulic hoses and tubes at the
locations shown in
Figure 16 and Figure 17 .
6