g221203
Figure 3
1.
Rear shroud
3.
Flange screws (remove
from both sides)
2.
Flange screws (loosen
these)
6.
Remove the 4 screws that secure the battery
cover to the machine and remove the cover
(
).
g221204
Figure 4
1.
Battery cover
2.
Screw
Installing the Cables
1.
Disconnect and discard the positive (red) battery
cable from the positive battery jump post,
the battery post connector, and the 12VDC
alternator (
and
Note:
Keep the removed nuts for later
installation.
g221400
Figure 5
1.
Positive battery jump post
3.
12VDC Alternator
2.
Existing cable routing
4.
Alternator cable
connection
g221412
Figure 6
1.
Rear of battery-disconnect
switch
3.
Existing cable routing
2.
Positive (+) battery jump
post
4.
Battery post connector
2
