Toro 137-5001, Installation Instructions, Page: 1 / 2

Form No. 3415-409 Rev A
CE Bagger Compliance Kit
TimeCutter ® HD Riding Mower
Model No. 137-5001
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove the existing curtain and knob.
Curtain 1
2
Bolt (1/4 x 5/8 inch) 1
Install the new curtain.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California
to cause cancer, birth defects, or reproductive harm.
1
Removing the Existing
Curtain and Knob
No Parts Required
Procedure
1. Park the machine on a level surface, shut off the
engine, engage the parking brake, and remove
the key.
2. Remove the existing curtain by loosening the
bolts holding the curtain to the frame and the
mower deck (
Figure 1 ).
g213267
Figure 1
1. Bolts
2. Curtain
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3415-409* A