Form No. 3414-416 Rev B
Belt Cover Kit
FWD Recycler
®
Lawn Mower
Model No. 136-9125
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Upper belt cover
1
Lower belt cover
1
Bolt (1/4 x 1.33 inches)
2
Engine-mount bolt (3/8 x 1 inch)
2
Install the kit.
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury.
Wear gloves when servicing the blade.
Preparing the Machine
1.
Shut off the engine and wait for all moving parts
to stop.
2.
Disconnect the spark-plug wire from the spark
plug and remove the electric-start button (if
present).
3.
Tip the machine onto its side with the air filter up.
4.
Use a block of wood to hold the blade steady
(
).
5.
Remove the blade, saving all mounting hardware
(
).
g206911
Figure 1
6.
Remove the belt from the blade drive and then
remove and retain the blade drive (
).
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3414-416* B
