Form No. 3427-816 Rev A
Door Mount Mirror Kit
Workman
®
GTX, HDX, and MD Utility Vehicles or Outcross Traction
Unit with Cab
Model No. 136-1997
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Left mirror mount
1
Right mirror mount
1
Left handle gasket
1
Right handle gasket
1
Side mirror arm assembly
2
Rearview mirror arm assembly
2
2
Flange-head screw (6 x 16 mm)
4
Install the mirror mounts.
1
Preparing the Machine
No Parts Required
Preparing the Machine
Workman GTX, HDX, and MD
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key from the key switch.
Preparing the Machine
Outcross 9060
1.
Park the machine on a level surface.
2.
Shift to the N
EUTRAL
position.
3.
Lower any equipped attachments.
4.
Engage the parking brake.
5.
Shut off the engine and remove the key.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3427-816* A
Summary of Contents for 136-1997
Page 4: ......
