Form No. 3393-700 Rev A
Deck Limit Kit
2014 and Before Groundsmaster
®
4000/4010 Rotary Mower
Model No. 130-6020
Installation Instructions
This kit fits on models 30603, 30605, 30607, and 30609.
Note:
Determine the left and right sides of the machine
from the normal operating position.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Axle bumper
2
Left bumper bracket
1
Right bumper bracket
2
2
Locknut
2
Install the axle bumpers and bumper
brackets.
Bolt (#10 x 1-1/4 inch)
4
Bolt (#10 x 2 inch)
4
Washer
8
Bumper
4
Plate
8
3
Locknut
4
Install the plates and bumpers.
1
Preparing the Machine
No Parts Required
Procedure
Position the machine on a level surface, set the parking brake,
lower the cutting units, turn the ignition off, and remove the
key.
CAUTION
If you leave the key in the ignition switch, someone
could accidently start the engine and seriously
injure you or bystanders.
Remove the key from the ignition switch before you
do any maintenance.
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
*3393-700* A
Summary of Contents for 130-6020
Page 4: ......
