
Form No. 3379-433 Rev A
High-Lift Blade and Baffle Kit
2012 TimeMaster Lawn Mower
Model No. 127-6879
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Important:
You will need a torque wrench to install the blades properly. If you do not have a torque wrench or are
uncomfortable performing this procedure, contact an Authorized Service Dealer.
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Preparing the Machine
No Parts Required
Procedure
1.
Lock the handle in the vertical position (Figure 1); refer
to Adjusting the Handle Height in the
Operator’s Manual
.
1
g024066
Figure 1
1.
Handle locked in the vertical position
2.
Disconnect the wire from the spark plug.
WARNING
The blades are sharp; contacting a blade could
result in serious personal injury.
•
Disconnect the wire from the spark plug.
•
Wear gloves when servicing the blade.
3.
Tip the machine onto its side, with the dipstick down,
until the upper handle rests on the ground.
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3379-433* A