
Form No. 3374-108 Rev A
Trash Bag Kit
GrandStand
®
Mower
Model No. 121-7530
Installation Instructions
Install this kit on the left side of the machine. Installing
it on the left side allows for installation of the Chute
Gate Kit on the right side.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
Bag bracket
1
1
Bolt, 3/8 x 1 inch (thread forming)
2
Install the bag bracket to the mower
Cup holder
1
Screw, #10 x 5/8 inch
2
Flat washer
2
2
Lock nut, #10
2
Install the cup holder
3
Trash bag
1
Install the trash bag
1
Installing the Bag Bracket to
the Mower
Parts needed for this procedure:
1
Bag bracket
2
Bolt, 3/8 x 1 inch (thread forming)
Procedure
Installing this kit on the left side allows for installation
of the Chute Gate Kit on the right side.
Install the bracket to the side of the machine with 2 bolts
(3/8 x 1 inch) (Figure 1). The bolts are thread forming
bolts. The holes do not require tapping.
g020053
1
2
3
Figure 1
1.
Left side of machine
3.
Bolt, (3/8 x 1 inch)
2.
Bracket
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved