Form No. 3369-438 Rev A
License Plate Kit
Multi-Pro
®
5800 Turf Sprayer
Model No. 120-8506
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
Plate light
1
License plate bracket
1
Phillips-head screw (10-24 x 5/8inch)
2
Lock nut (10-24)
2
License plate bracket
1
Hex-head flange screw (5/16-18 inch)
4
1
Lock nut (5/16 inch)
1
Install the license plate bracket.
2
No parts required
–
Connect to the wire harness.
1
Installing the License Plate
Bracket
Parts needed for this procedure:
1
Plate light
1
License plate bracket
2
Phillips-head screw (10-24 x 5/8inch)
2
Lock nut (10-24)
1
License plate bracket
4
Hex-head flange screw (5/16-18 inch)
1
Lock nut (5/16 inch)
Procedure
1. Install the plate light assembly to the license plate
bracket using two phillips-head screws (10-24 x
5/8inch) and two lock nuts (10–24) as shown in
Figure 1.
G0171 18
1
2
3
4
Figure 1
1.
Phillips-head screw (10-24
x 5/8inch)
3.
Plate light assembly
2.
License plate bracket
4.
Lock nut
2. Install the light and bracket assembly to the mount
using two hex-head flange screws (5/16-18 inch) and
two lock nuts (5/16 inch) as shown in Figure 2.
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
