Form No. 3408-523 Rev A
Side Mirror Kit
Workman
®
MD/MDX/MDE Utility Vehicle
Model No. 119-9546
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Use
Installing the Side Mirror Kit (for Machines without a Canopy) (page 2)
when installing the kit on machines without a
canopy. Use
Installing the Side Mirror Kit (for Machines with a Canopy) (page 3)
for machines with a canopy. You may
discard unused components.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
No parts required
–
Prepare the machine.
Upper mirror bracket
1
Lower mirror bracket
1
Mirror-mounting bracket
1
Bolt (5/16 x 3/4 inch)
2
Flange nut (5/16 inch)
2
Mirror
1
Screw (1/4 x 1 inch)
4
Nut insert
4
Install the side mirror kit (without canopy).
Mirror-mounting bracket
1
Bolt (5/16 x 1-1/2 inches)
2
Flange nut (5/16 inch)
2
Install the side mirror kit (with canopy).
Preparing the Machine
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key from the key switch.
g038447
Figure 1
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3408-523* A
