Form No. 3354-294 Rev A
French Decal Kit
For TimeCutter Z Riding Mowers
Model No. 110-6506
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
Decals
6
Install the decals.
Note:
Visit www.Toro.com and download the French
Operator’s Manual
that corresponds to the model
and serial number of the product this kit is installed on.
Step
1
Installing the Decals
Parts needed for this step:
6
Decals
Procedure
Install the decals in the positions indicated in the
table below. Place each French decal directly over
the corresponding US English decal.
Install each decal as follows:
1. Thoroughly clean the area where you will
install the decal.
2. Dampen the area with water or mildly soapy
water.
3. Peel the decal from the backing and install it
in place.
4. Squeegee across the surface of the decal,
starting at the center of the decal and working
toward the edges, using overlapping strokes.
© 2005—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
Summary of Contents for 110-6506
Page 3: ...107 7398 English On console 107 2514 French 3...
Page 4: ......
Page 7: ...107 7398 Anglais Sur la console 107 2514 Fran ais 3...
Page 8: ......
