g366693
Figure 73
Mid-mount Attachment Tilt Cylinder
1.
Grease fitting
2.
Mid-mount attachment tilt
cylinder
g385703
Figure 74
Rear Attachment Lift Cylinder
1.
Grease fitting
2.
Rear attachment lift
cylinder
Engine Maintenance
Engine Safety
•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Do not change the governor speed or overspeed
the engine.
Engine Oil Specification
Use high-quality engine oil that meets the following
specifications:
API classification level:
SJ or higher
Oil Viscosity:
SAE 30—above 4°C (40°F)
Checking the Engine-Oil
Level
Service Interval:
Before each use or daily
Note:
The engine is shipped with oil in the crankcase;
however, you must check the oil level before and after
you first start the engine.
1.
Prepare the machine for maintenance; refer to
Preparing for Maintenance (page 44)
.
2.
Remove the hood; refer to
(page 45)
.
3.
Clean around the dipstick and dipstick tube.
4.
Remove the dipstick (
) and wipe it with
a clean rag.
g333929
Figure 75
1.
Dipstick (engine oil)
5.
Insert the dipstick into the tube (
) until
it is fully seated.
49
