Toro 08102, Operator'S Manual

Page: 91 / 104

Checking the
Transaxle-Fluid Level
Service Interval: Every 250 hours
Fluid Type: Toro Premium Synthetic Transaxle Fluid
(Toro Part 145-2048)
1. Park the machine on a level surface.
2. Shift the transmission lever to the P (P
ARK
)
position.
3. Shut off the engine and remove the key.
4. Remove the fill plug on the transaxle ( Figure
104 ).
Note:
The fluid level should be even with the
bottom of the fill plug.
5. If the fluid level is low, remove the fill plug and
add the specified fluid until it runs out of the hole
(
Figure 104 ).
6. Replace the fill plug and torque it to 14 to 30
N∙m (10 to 22 ft-lb).
g362542
Figure 104
1. Drain plug 2. Fill plug
Changing the Transaxle
Fluid
Service Interval: Every 500 hours
Fluid Type: Toro Premium Synthetic Transaxle Fluid
(Toro Part 145-2048)
Fluid Capacity: 1200 ml (1.3 US qt)
1. Align a drain pan under the drain plug ( Figure
104 ).
2. Remove the fill plug ( Figure 104 ).
Note:
Retain the fill plug and seal for installation
in step 6 .
3. Remove the drain plug, and allow the fluid to
drain completely (
Figure 104 ).
Note:
Retain the drain plug for installation in
step 4 .
4. Install the drain plug and torque it to 14 to 30
N∙m (10 to 22 ft-lb).
5. Fill the transaxle with the specified fluid and
capacity until it is even with the fill hole.
6. Install the fill plug and torque it to 14 to 30 N∙m
(10 to 22 ft-lb).
91