2-Wheel Drive/4-Wheel
Drive/Differential Lock Indicator
Note:
When the indicator (
) is blinking it
means that the setting is not engaged/inactive; when
it becomes solid, it is engaged/active.
Refer to
and the corresponding table for
using the 2-wheel drive/4-wheel drive switch and
differential lock switch together.
g388483
Figure 63
1.
Up position—engages
4-wheel drive
4.
Mid position—engages the
rear differential lock only
2.
Down position—engages
2-wheel drive
5.
Down
position—disengages
the differential lock(s)
3.
Up position—engages
both the front and rear
differential locks
2-Wheel
Drive/4-Wheel
Drive Switch
Position
Differential Lock
Switch Position
Result
2
5
No indicator
2
4
2
3
(blinking—inactive
configuration)
1
5
1
4
1
3
Cruise Control/Speed-Limited
Indicator
If the cruise control is set, the indicator illuminates
(
).
If the top speed of the machine is limited, the indicator
illuminates. The speed is limited if the following
occurs:
•
The cruise control is set.
•
There is a fault code.
•
A seat belt is not buckled.
Glow-Plug Indicator Light
The glow-plug indicator light (
) illuminates
when you turn the key switch to the O
N
position and
the glow plug is activated.
When the glow-plug indicator light turns off
(approximately 5 to 10 seconds), you may start the
engine.
Headlights Indicator
The headlights indicator illuminates when the
headlights are in the O
N
position.
53
Summary of Contents for 08102
