6.
Repeat steps
through
for the left, rear roll
bar assembly.
7.
Loosely secure the right, front roll bar assembly
to the right roll bar mount bracket using 2
hex-head bolts (3/8 x 1-1/4 inches) and 2
locknuts (3/8 inch) as shown in
.
g361799
Figure 13
8.
Loosely secure the right, front roll bar assembly
to the right, rear roll bar assembly using 2
hex-head bolts (3/8 x 1-1/4 inches) and 2
locknuts (3/8 inch) as shown in
.
g361800
Figure 14
16
Summary of Contents for 08102
