Toro 08102, Operator'S Manual, Page: 12 / 104

6
Installing the Rollover
Protection System (ROPS)
For Standard (2-Person) Models
Parts needed for this procedure:
1 Left, front roll bar assembly
1 Right, front roll bar assembly
1 Left, rear roll bar assembly
1 Right, rear roll bar assembly
1 Front crosslink
1 Rear crosslink
1
Seat panel
2 Shoulder restraint
8 Hex-head bolt (3/8 x 1-1/4 inches)
12 Carriage bolt (5/16 x 3/4 inch)
4 Hex-washer head bolt (5/16 x 3/4 inch)
10 Hex-washer head bolt (1/4 x 3/4 inch)
2 Hex-washer head bolt (1/4 x 1 inch)
2 Button-head bolt (5/16 x 1-1/2 inches)
2 Flange-head bolt (3/8 x 2-1/4 inches)
14 Locknut (5/16 inch)
10 Locknut (3/8 inch)
2 Locknut (1/4 inch)
2 Locknut (7/16 inch)
Procedure
1. Raise the cargo bed ( Figure 7 ).
g361797
Figure 7
12