Removing Debris from the
Cooling System
Service Interval:
Before each use or daily—Remove
debris from the engine area and
radiator.
1.
Park the machine on a level surface.
2.
Shift the transmission lever to the P (P
ARK
)
position.
3.
Shut off the engine and remove the key.
4.
Clean the engine area thoroughly of all debris.
5.
Remove the 7 screws securing the grill and
remove the grill (
).
g365212
Figure 107
1.
Screw
2.
Grill
6.
Clean the radiator assembly using compressed
air.
Note:
Blow debris away from the radiator.
7.
Install the grill using the previously removed 7
screws (
).
94
Summary of Contents for 08102
