Servicing the Engine Oil
Service Interval:
Before each use or daily
Every 250 hours—Change the engine oil and
filter.
Note:
Change the oil more frequently when operating
conditions are extremely dusty or sandy.
Note:
Dispose of the used engine oil and oil filter at a
certified recycling center.
Engine-Oil Specifications
The engine ships with oil in the crankcase; however,
check the oil level before you first start the engine.
Check the oil level before operating the machine each
day or each time you use the machine.
Oil Type:
Toro Premium Engine Oil
If using an alternate oil, use high-quality, low-ash
engine oil that meets or exceeds the following
specifications:
•
API service category CJ-4 or higher
•
ACEA service category E6
•
JASO service category DH-2
Important:
Using engine oil other than API
classification CJ-4 or higher, ACEA E6, or JASO
DH-2 may cause the diesel particulate filter to plug
or cause engine damage.
Crankcase Capacity:
2.2 L (2.3 US qt) when the
filter is changed
Oil Viscosity/Grade:
SAE 10W-30 (all temperatures)
Note:
Toro Premium Engine oil is available from
your distributor. See the
Parts Catalog
or contact an
authorized Toro distributor for part numbers.
Checking the Engine-Oil Level
1.
Park the machine on a level surface.
2.
Shift the transmission lever to the P (P
ARK
)
position.
3.
Shut off the engine and remove the key.
4.
Raise the cargo bed.
5.
Check the engine-oil level as shown in
g029301
Figure 85
79
Summary of Contents for 08102
