Form No. 3361-381 Rev A
Hitch Frame Kit
for Workman HD/HDX/HDX-D Series Utility Vehicle
Model No. 07377—Serial No. 290000001 and Up
Installation Instructions
Safety
Safety and Instructional
Decals
Safety decals and instructions are easily
visible to the operator and are located
near any area of potential danger.
Replace any decal that is damaged or
lost.
115-2047
1.
Warning—do not touch the hot surface.
Installation
1. If a 2/3 or Full Size Bed is installed on vehicle, it
must be removed as follows:
A. With bed lowered, remove clevis pins and lynch
pins securing each cylinder rod end to bed
mounting plates (Figure 1).
Figure 1
2/3 Bed Shown
1.
Bed mounting plate
3.
Clevis pin
2.
Cylinder rod end
4.
Lynch pin
B. Remove clevis pin and two lynch pins securing
each set of pivot plates to frame channels
(Figure 2).
Figure 2
Full Bed Shown
1.
Vehicle frame channel
3.
Clevis pin
2.
Pivot plate
4.
Lynch pin
© 2009—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
