Troubleshooting
Vehicle Status Light Flash Pattern
Problem
Possible Cause
Corrective Action
Always on
1. The system is functioning
properly.
1. None
1 ash
1. The computer
programming
personality is out of
range.
1. Turn the On/Off key to
the Off position, wait
a few seconds, and
turn the On/Off key to
the On position. If the
condition continues,
refer to your Authorized
Service Dealer.
2 ashes
1. The accelerator pedal
was pressed when the
On/Off key was turned.
1. Turn the On/Off key to
the Off position, release
the accelerator pedal,
and turn the On/Off key
to the On position.
1. The power block has a
short circuit (MOSFET
S/C).
1. Turn the On/Off key
to the Off position,
wait a few seconds,
and turn the On/Off
key to the On position.
Check all batteries and
high current controller
connections If the
condition continues,
refer to your Authorized
Service Dealer.
3 ashes
2. A poor batter or power
cable connection.
2. Turn the On/Off key
to the Off position,
wait a few seconds,
and turn the On/Off
key to the On position.
Check all batteries and
high current controller
connections If the
condition continues,
refer to your Authorized
Service Dealer.
40
Summary of Contents for 07287TC
Page 42: ...Schematics Electrical Schematic Rev A 42...
Page 43: ......
