Figure 36
1.
Neutral bracket
4.
0.03-0.06 inch gap
2.
Pull up
5.
Wrong, adjust to achieve
a gap of 0.03-0.06 inch
3.
Cable boot
6. Start the engine and shift into Forward, Reverse,
and Neutral several times to ensure that the neutral
bracket is operating properly.
Inspecting the Tires
Service Interval:
Every 100 hours
Every 100 hours
Check the tire condition at least every 100 hours
of operation. Operating accidents, such as hitting
curbs, can damage a tire or rim and also disrupt wheel
alignment, so inspect tire condition after an accident.
Check the wheels to ensure that they are mounted
securely. Torque the lug nuts to 45-65 ft-lb (61-88 N-m).
Adjusting the Suspension
Figure 37
1.
Shock absorber
2.
Collar
The spring over coil shock absorbers employ a collar
that can be adjusted at each wheel to achieve a desired
suspension performance or ride feel. To adjust the
shock absorbers, consult the machine’s
Service Manual
for the proper procedures and tools used to perform
the adjustments or contact your local Authorized Toro
Dealer for service.
Adjusting Front Wheel Toe-In
Service Interval:
Every 100 hours
Check the front wheel toe-in after every 100 operating
hours, or annually, whichever occurs first.
The toe-in should be 0-1/4 inch (0-6 mm) with the
following parameters:
•
The vehicle should be driven back and forth a few
times to relax the A-arms.
•
Measure the toe-in with the wheels facing straight
ahead and a 175-225 lb (79-102 kg) operator in the
driver’s seat.
Note:
The driver should drive up to the
measurement area and stay seated in the vehicle
while the measurement is being taken.
1. Measure the distance between both of the front tires
at the axle height at both the front and rear of the
front tires (Figure 38).
33
Summary of Contents for 07266TC
Page 10: ...99 7350 1 Maximum tongue weight is 50 lb 23 kg maximum trailer weight is 400 lb 181 kg 10...
Page 41: ...Notes 41...
Page 42: ...Notes 42...
Page 43: ...Notes 43...
