Form No. 3432-927 Rev A
Cab Kit
Workman
®
GTX Utility Vehicle
Model No. 07142—Serial No. 316000001 and Up
Model No. 07142—Serial No. 400000000 and Up
Operator's Manual
Important:
The Power Converter Kit is required
to use the cab on a Workman GTX Electric utility
vehicle. Contact your authorized Toro distributor
for more information.
Important:
The Spring Kit is required to use
the cab on a Workman GTX utility vehicle. The
Spring Kit should be installed only by qualified
Toro Service Technicians using approved tools.
Improper removal, disassembly, or installation of
the spring assembly poses a danger to you and
bystanders. Please contact your authorized Toro
distributor for the appropriate tools and proper
installation of this kit.
Safety
WARNING
The compressed spring in the spring and
shock assembly represents a stored-energy
hazard. If the spring is not properly retained
during compression or removal, it can injure
you and/or bystanders.
•
Always use the approved Toro
spring-compression tool to compress the
spring in a secure position when removing
the retention collar.
•
Always use care when removing pressure
from the compressed spring.
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
decal133-1016
133-1016
1.
Warning—read the
Operator's Manual
; wear
the seatbelt, and avoid
tipping the machine.
2.
Warning—wear hearing
protection.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3432-927* A