Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
RH wheel motor
1
LH wheel motor
1
Hydraulic fitting, 45 degrees
4
Bolt (1/2 x 2-1/4 inch)
8
1
Lockwasher (1/2 inch)
8
Mount the wheel motor assemblies.
Manifold
1
Hydraulic fitting, straight
7
Diagnostic fitting
2
Dust cap
2
Bolt (3/8 x 1-3/4 inches)
3
Lockwasher (3/8 inch)
3
2
Spacer
3
Install the manifold.
3
Hydraulic hose
4
Install the wheel motor hoses.
Hydraulic tube, part no. 108-7624
1
Hydraulic tube, part no. 108-7625
1
Hydraulic tube, part no. 108-7626
1
Bulkhead lock nut
3
Tube clamp halves
2
Cap screw (5/16 x 1-1/2 inches)
1
Flat washer (.344 x .688)
1
4
Lock nut (5/16 inch)
1
Installing the manifold tubes.
5
No parts required
–
Removing the front tube and the
hydraulic hose.
Hydraulic tube, part no. 108-7622
1
Hydraulic tube, part no. 108-7623
1
Hydraulic fitting, 90 degrees
1
Hydraulic hose
1
6
Cable tie
3
Installing the front tubes and the
hydraulic hose.
7
No parts required
–
Checking the hydraulic hoses and tubes.
Decal
2
Decal 110–8869, danger
1
8
Decal 110–8973, CE danger (Europe
only)
1
Installing the decals.
Media and Additional Parts
Description
Qty.
Use
Installation instructions
1
Use to install the kit
Parts catalog
1
Use to reference part numbers
2
