manualshive.com logo in svg

tornos MultiAlpha 6x32, Safety Instructions

Share
Download
tornos MultiAlpha 6x32 Safety Instructions Download Page 86

7. Fire prevention - Safety instructions MultiAlpha 6x32

300940 en - 03/11

7-2

7.1.

Fire prevention

Oxygen

Heat

Fuel

Material machining

Chips, cutting liquids, mists,
Impurities.

explosion

fire

Fig. 38

Prohibition !

It is strictly prohibited to smoke inside the machine and/or in its immediate vicinity.

Warning ! User Responsibility

If cutting oils are used and/or if the machine operates under high inflammability
risk conditions, the user shall be solely responsible, or if the machine operates
unattended, TORNOS SA strongly recommends equipping it with an automatic
fire extinguishing system.

Warning ! Materials

Machining inflammable materials such as but not exclusively titanium and alloys
containing such metals, as well as working resistant materials and those used in
medical and other potential risk applications, increase the danger of fire.

Warning ! In case of fire in the machine

Do not turn off the machine’s main power switch before activating the firefight­
ing system.

Summary of Contents for MultiAlpha 6x32



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands