background image

Instruction Manual - EvoDECO 10/10 & 10/8

298061_en - 07/12

     

Source suvaPro

Behaviour in the event of an emergency

1. Keep calm
2. Think
3. Act

Raise the alarm

Ambulance 
Police
Fire brigade
Poisoning
Doctor
Hospital

Who?

Person raising the alarm.

What?

What happened?

Where?

Place, street, number, access, floor, etc.

How many?

Number of people involved.

Other

Particular dangers, dangerous materials, etc.

Accident

1. Secure the dangerous area.
2. Raise the alarm.
3. Give first aid.
4. Inform ambulance staff.

Position(s) of first aid box:

Fire

1. Notify the fire brigade.
2. Find shelter for yourself and others.
3. Close window(s) and door(s).
4. Inform the fire brigade staff.
5. Put the fire out.

Evacuation

1. Notify the people in danger and evacuate them.
2. Leave the premises using the stairs.
3. Go to the assembly point.

Assembly point(s):

Person in charge of keeping the emergency numbers, first aid boxes and training 

up-to-date:

Mandatory!
Apply the regulations in force in your company. If there are no regulations, you can adapt the 

above example to your country’s legislation and to the specific needs of your company.

Summary of Contents for EvoDECO 10/10







































Reviews: