38
ASSEMBLY
14. RADIO-ULNAR TRICEPS ON CUTTING GUIDE
• Components required to assemble the triceps on ulnar cutting guide:
- Triceps on cutting guide.
- Sliding screw support.
- Forearm axis guide.
- 4 locking screws: flat/trochar/cannulated (Ø 2 mm).
• Choose the appropriate side cutting guide, one size fits all.
• Assemble the cutting guide as shown (see assembled cutting guide fig. (64a-d).
(fig. 64a)
(fig. 64b)
(fig. 64c)
(fig. 64d)
Screw the forearm axis
guide into the cutting
guide.
Assemble the spool
support to the jig on
either side depending
on whether the ulnar
cut is to be made from
lateral or medial.
Slide the screw support
onto the cutting guide.
Medial
Lateral
Right
Left
The radial head cut is
performed at the level
of the notch on the side
of the triceps on guide.
Screw the 4 desired type screws
(cannulated, trochar or flat) into the
cutting guide. Insert the selected
spool on the cutting axis.
Medial
Cutting guide
Sliding screen
support
Triceps on
Forearm axis guide
ASSEMBLY
1
3
4
2
Latitude Elbow Prosthesis
Latitude Elbow Prosthesis Surgical Technique UCLT101
TO LATITUDE INT UCLT101.qxd:Mise en page 1 7/07/10 15:01 Page 37
