3
EN
Machine Measurement:
Width 240 mm, Depth 210 mm, Height 285 mm.
Machine Weight:
6.3 kg
Grinding Wheel:
Tormek Diamond Wheel Fine DWF-200,
∅
200×40 mm, 120 rpm, torque 8.4 Nm.
Honing Wheel:
∅
160×30 mm
Housing:
Zinc cast top, Impact resistant ABS plastic
Motor:
Industrial single phase,
120 W (input) 230 V, 50 Hz or 115 V, 60 Hz, duty 30 min/hour, maintenance free, silent
running 54 dB, 10,000 hour life.
Warranty:
7 years. When used for a professional
sharpening service the warranty is 2 years.
Handle
knife sizes:
Getting Started
Unscrew the left-handed thread
EzyLock nut by hand.
Make sure the pins on the
honing wheel locate into the
holes on the drive wheel.
Mounting: Put the wheel onto
the shaft and turn the EzyLock
anticlockwise by hand. When
sharpening, the grinding wheel
will automatically tighten to the
correct torque.
Dismounting: Turn the wheel
clockwise by hand whilst
holding the honing wheel still,
and the EzyLock washer nut will
automatically become loose.
1. Mounting the diamond wheel
2. Mounting the honing wheel
Knife Sharpening for
the Professional Kitchen
The Tormek T-2 Knife Sharpener has been made to meet the professional kitchen’s need for
an efficient workflow and effective sharpening. The concept is a further development of the
diamond bench stone, which in combination with the control of the edge angle makes it
possible to easily achieve a professional sharpening, right when and where needed.
Width
14–60 mm
(
9/16
"–2
3/8
")
Thickness
Max 3.5 mm
(
3/32
")
Translation of the original instructions
