66
Axe Jig SVA-170
Design
The jig comprises a clamp with a rubber lined, wedge
shaped stop, which holds the axe in a fixed position to-
wards the grindstone. The clamp works on the Universal
Support, on which it slides across the wheel.
The jig is designed so that the rotation of the wheel presses
the axe firmly into the jig. You only need to hold and guide
the axe with your hands. This jig only works with the wheel
running towards the edge. If necessary, the honing wheel
can be removed to allow clearance for the axe handle.
Positioning of Machine
Grinding direction:
Towards the edge.
AXES AND HATCHETS
Fits axes up to 170 mm (6¾").
Larger axes are ground without a jig and
supported on the Universal Support.
(page 42).
