6
ASSEMBLY
All numbers in parenthesis () refer to the index number from the parts breakdown
1. Attach the two base support sections (21) to
the frame (6) with bolt (24), washer (18), spring
washer (19) and nuts (20).
3. Attach the hydraulic air pump (28) to the frame
assembly (6) with spring washer (34) and bolt
(28). Ensure that the hydraulic air pump (40) is
securely installed.
Note: DO NOT drop hydraulic air pump during
installation. Pump could be damaged if dropped or
unsecured! Check that pump is secure before
releasing your hold of the hydraulic air pump.
2. Attach support rail #1 (22) and support rail #2 (25)
to base (21) and frame assembly (6) with bolt (24),
washer (18), spring washer (19) and nuts (20).
4. Locate the hydraulic hose connection (33) on
hose and power unit assembly (28). Install the
O-ring (9) into the groove of the hose connection
fitting (33). Then Connect the hydraulic hose
to (33), to the power unit assembly (28).Use a
wrench to securely tighten the hose fitting on the
power unit assembly (28).
24
21
19
18
20
6
24
25
19
21
18
20
6
22
35
34
6
28
9
28
33
