Toptica FemtoFiber pro IR, Manual, Page: 97 / 108

6. Appendix
Page 93
Status: 6.9.18
6.9.8 Full Command Set
The commands explained above are most likely sufficient for all standard applications. If, however, more
detailed information about the FemtoFiber
®
pro control language is needed, a PDF document with the
full set of available commands is available from each laser directly. It is stored in the internal memory of
the laser, is updated with each firmware update and always contains a document version compatible
with the currently installed firmware.
The easiest way to get the document is downloading it from the laser's webpage. When the laser is
operated without Ethernet connection the command
usbdocu() (command, no parameters)
will save a PDF document with the FemtoFiber
®
pro command reference to a removable storage device
plugged into the Type-A USB connector at the FemtoFiber
®
pro Control Unit. Please make sure you have
a storage device with sufficient memory plugged in. A file named “pythonlist.pdf” will be copied to the
device. The device can then be removed again and the document can be viewed with any PC.