Toptech MultiLoad II DIV-2, Installation Manual

Page: 12 / 93

3
Chapter 1 General Information & Warnings
Receiving and/or Returning Equipment 1.1
At receipt, the MultiLoad II/ RCU II should be immediately inspected after opening the packaging case.
If any damage is visible, notify the carrier at once to establish liability.
Contact Toptech
’s Return Materials Department to initiate timely repair or replacement of the unit.
A Return Materials Authorization (RMA) will be for the purpose of returning the product or parts
requiring repair. Do not return any material to Toptech without an RMA.
Contact Information for Americas:
Return Materials Department
Toptech Systems, Inc.
1124 Florida Central Pkwy
Longwood, FL 32750 USA
+1 (407) 332-1774
Contact Information for EMEA and Asia:
Return Materials Department
Toptech System NVs
Nieuwe weg 1- haven 1053
2070 Zwijndrecht, BELGIUM
+32 (0)3 250 60 60
Prior to installation, the MultiLoad II/ RCU II should be stored in its packing case and be protected from
damage due to handling and adverse weather conditions.
Chapter
1