11
Serial Connection
The 5-pin terminal block connector is provided at the
front panel of the Converter. During shipping, the
removable green terminal block may already be detached
from the five pin terminal contact point. It may be easier
to attach the serial cable wires to the green terminal
block if it has first been unplugged from the terminal
contact point on the Converter.
On the terminal block, use a flathead screwdriver to
loosen the screws and then insert the related cable as
shown in the figure below. Tighten screws until snug.
RS-422/485 cabling
LED Indicators
The Converter has following LEDs.
Power Indicator (PWR):
This LED lights green when the
Converter is receiving power from input. It is located
beside the power adapter pin.
RCV LED
Summary of Contents for EX-9541N
Page 1: ...RS 422 485 to Fiber Converter User s Guide...
Page 14: ...14...
