9
JIB SHEET
1. Thread the jib sheet through the fairlead and cleat on
the side of the hull as shown.
2. Then take the jib sheet across the deck to the
opposite side of the hull and through the block and
fairlead as shown.
3. Then take the end of the jib sheet around the front
of the mast. Then through the clew eye at the back of
the jib sail and tie off using a figure of eight knot at the
end of the jib sheet.
4. Take the other end of the jib sheet around the front of
the mast and then through the clew eye and tie off using
a figure of eight knot at the end of the jib sheet.
5. Your sheets should now be tied off with the knots
either side of the jib sail as pictured.
1
2
3
4
TOPAZ
UNO
RACE
PLUS
TOPAZ
UNO RACE
PLUS
RIGGING INSTRUCTIONS
TOPAZ
UNO RACE
PLUS
INVENTORY
Topaz Hull
Two piece mast
Boom
Daggerboard
Rope Set
Jib Sail
Jib Kit
Rudder Assembly incl. Extra-Length Rudder Blade
RACE Sail
The Topaz UNO RACE PLUS consists of the same
components as the Topaz UNO PLUS, with the
exception of the main sail and the rudder blade.
The UNO RACE PLUS main sail is a battened mylar
sail with a larger sail area and a slightly fuller cut.
The rudder is an extra length GRP blade which
provides greater control.
In order to rig the UNO RACE PLUS, follow the UNO
and UNO PLUS rigging instructions.
This will give you a continuous line across the deck,
round the front of the mast and linking through the jib
clew from both sides.
