Page 89 of
93
In the WebUI, you can manage some configurations related to network, live broadcast, etc. Such as network
video stream (encoding, bit rate, resolution and frame number, etc.), network settings (IP, gateway, DNS and
ports that are not recommended to be changed, etc.), RTSP, RTMP, SRT, ONVIF, NDI, Audio and more.
Network Camera Control Protocol
Control Notes:
PTZ over TCP/UDP
The camera currently supports various PTZ control methods, including RS232, RS485, IR remote controller,
webinterface, HTTP-CGI and TCP/UDP protocol.
The camera includes an internal TCP server. The default port number is 5678. When client and server set up a TCP
connection, the client sends PTZ command to the internal server and the server will then parse and execute the PTZ
commands.
The camera includes an internal UDP server. The default port number is 1259. When client and server set up a UDP
connection, the client sends PTZ commands to the internal server and the server will then parse and execute the PTZ
commands.
The command format based on VISCA is shown above in the Serial Communication Control Section
