Page 28 of
93
After a successful submission, we must reboot our camera for the settings to take effect.
And we must restore the IP settings of our computer. Please repeat the "Set your computer's IP address"
section on page 18. The examples of this book, our Windows computers and Macs are in auto mode, so we
need to set their IP addresses back into auto-obtaining mode.
After we rebooted the camera and restored the computer IP settings. We should be able to connect the
camera.
(In this example, we set the camera IP to 192.168.199.77. We can see that we have successfully connected to
the camera.)
How to use top0 Camera Tool
You can manage multiple cameras with the top0 camera tool. Its features include simultaneous low-latency
preview of multiple cameras, network settings, Pan-Tilt-Zoom controls, image/color/exposure settings,
OSD menu controls, local recording controls, firmware upgrades, Focus Calibrations, gamepad supports,
saving configurations for each preset and more. There are also Focus Lock/Focal Range Control/Pan/Tilt
Limits/Motion Sync controls specially designed for top0 T7F series cameras and PTZOptics, etc.
You can download it at
, but unfortunately only the Windows version is
currently released. MacOS, Android and IOS versions are still in development. And we apologize for this.
