Fig. 19
Fig. 20
Cro s s -c u ttin g n a rro we r wo rk p ie c e s
Adjust the guard rail so that the work piece parts are not able to contact the upwards rotating part of the saw blade.
Feed work pieces only with a cross limit stop or a cross feeder. (Fig. 20)
(CAUTION:
Do not remove pieces of debris from the sawing tool area with your hands.)
An g u la r lim it s to p
The angular limit stop can be inserted into the machine table T-grooves on the right or left hand side of the saw
blade. Cross-cuts can be made at all angles by pivoting the limit stop. The 90ºmilled angular limit stop is especially
suited for exact miter cuts. See the frame-cutting example. (Fig. 21)
Fig. 21
１０
HM-TS250 250MM CIRCULAR SAWBENCH
VER 07-07-2013
