4. Installation via clamp
Please refer to the picture below:
-
Screw one clamp each via a M12 screw and nut onto the Omega holders.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the second
Omega holder.
Pull the safety-rope through the holes on the bottom of the base and over the trussing
system or a safe fixation spot. Insert the end in the carabine and tighten the safety screw.
-
4-
7.DMX Configuration
CH 1 : Pan
0°-- 540° / 630
CH 2 : Tilt
0°-- 280°
CH 3:Dimmer
0 -- 100%
000-- 006 Off
007-- 065 strobe from slow to fast
066-- 069 Off
070-- 128 thunder pulse strobe from slow to fast
129-- 132 Off
133-- 191 Fade in with Strobe ,slow from fast
192-- 195 Off
CH 4:Strobe
196-- 255 Fade out with Strobe , slow from fast
CH 5: red
000 –255 (0 blackout , 255 red 100%)
CH 6: green
000–255 (0 blackout , 255 green 100%)
CH 7 :blue
000 –255 (0 blackout , 255 Blue 100%)
000 -- 004 Off
005 -- 044 8 fixed colo
045 -- 049 Off
050 -- 094 eight color jump change
095 -- 099 Off
100 -- 149 eight color fade
150 -- 154 Off
155 -- 166 red+green from dark to bright
167 -- 178 green+red from bright to dark
179 -- 190 green+blue from dark to bright
191 -- 202 blue+green from bright to dark
203 -- 214 blue+red from dark to bright
215 ---226 red+blue from bright to dark
227 -- 238 red+green+blue from dark to bright
239 -- 250 blue+(ren from dark to bright,green from bright to dark)
the same time
CH 8 : Macro
251 -- 255 Color output 100%
CH 9: X 16BIT
PAN 16bit tiny adjustment
CH 10: Y 16BIT
TILT 16bit tiny adjustment
CH11 :
XY speed
CH12 Dimmer
speed
CH13
005--127 Auto mode 255 Reset
-7-
