3. Operation Instructions
-The moving head is an LED wash light for onsite decoration
purpose.
-Don’t turn on the fixture if it’s been through severe temperature
difference like after transportation because it might damage the
light due to the environment changes. So make sure to operate the
fixture until it is in normal temperature.
-This light should be keep away from strong shaking during any
transportation or movement.
-Don’t pull up the light by only the head, or it might cause
damages to the mechanical parts.
-Don’t expose the fixture in overheat, moisture or environment
with too much dust when installing it. And don’t lay any power
cables on the floor. Or it might cause electronic shock to the
people.
-Make sure the installation place is in good safety condition
before installing the fixture.
-Make sure to put the safety chain and check whether the screws
are screwed properly when installing the fixture.
-Make sure the lens are in good condition. It’s recommended to
replace the units if there are any damages or severe scratch.
-Make sure the fixture is operated by qualified personnel who
knows the fixture before using.
-Keep the original packages if any second shipment is needed.
-Don’t try to change the fixtures without any instruction by the
manufacturer or the appointed repairing agencies.
-It is not in warranty range if there are any malfunctions from not
following the user manual to operate or any illegal operation, like
shock short circuit, electronic shock, lamp broke, etc.
-3-
8. Technical Specifications
36pcs 9W Tri-Color high power LEDs
50,000 hours lifespan and low power consumption
16 bit smooth and precise resolution for PAN/TILT movement
540°/630° pan and 280° tilt movement
Scan position memory, auto reposition after unexpected movement
RGB color mixing system
LED shutter
LED dimming
LED rainbow effect
Macros effect
Strobe effect with 20 flashes per second and pulse effect
General dimming and blackout for all four colors
13DMX channels
DMX512, master-slave and sound activated controllable or auto
operation
Blue background LCD display
Input Voltage: AC100-240V 50-60Hz
Fan standard :size: 90X90X25 – 60X60X15
Fuse standard(at the bottom): 3.15A/250V -5A/250v:
Power Consumption: 250W
Dimensions:
350x260x350mm
Packing Dimensions:
425x295x395mm
Net Weight: 9kgs
Gross Weight: 11kgs
-8-
